new account »   log in »
 
 
English polskienglishdeutschрусский
 
 
 
 
 
 
         Products
back
 You are here:  Home Components Ema-elfa Products
» Electromagnetic Brakes
» Powder Brakes and Clutches
» Electrical self-braking motors
» Self-braking motors for quiet operation ( with brakes HPS..AT, 2HPS..BT )
» Electric DC motors ( direct current )
» Electrohydraulic Releases
» Tool boxes
» OZK , PZK discon. and changer-over switches (UL 94 V-0)
» EFM - Control buttons
» ZG , ZW - Sockets and plugs
» Cable Unwinders , Length Meter
» Cold rolled screws and spindles
» Services
»
 

ExZE-X - Explosion-proof - substitutes ZHA

 

ExZE-X - Explosion - proof - substitutes ZHA


Application

 

Operation of the release consists in advance of the piston rod with appropriate force and to specific stroke.
With built-in return spring, return of the piston rod also occurs with appropriate force.
Electrohydraulic release finds application mainly in brakes for releasing (opening) shoe brakes. With built-in spring, it not only releases the brake but also generates braking torque. The release can be used for all applications requiring to-and-fro movement, e.g. to actuate gates and valves, to open and close flaps and doors, to raise and lower barriers, to move levers and pull-rods as well as to execute operations of to-and-fro movement in various machines and equipment.
The release can be used both for continuous operation S1 as well as for periodically interrupted operation S3 with relative loading time up to 100% and number of actuations up to 2000 c/h.

 

Operating conditions

 

Electrohydraulic release is designed for operation in mining plants in which methane hazard or coal-dust explosion hazard occurs (equipment group I – category M2) as well as in places other than those mentioned above which are endangered with occurrence of explosive atmosphere (equipment group II – category 2 GD) Ex IM2/II 2 GD.
This release is an explosion-proof device with flame-proof enclosure group I and IIB of temperature class 125°C (T4), with signaling circuits of spark-proof version: Exd[ia] I/IIB 125°C (T4). As a device protected by its enclosure “tD”, the release can be used in the presence of inflammable dust in zone 21 and 22: Ex tD A21 IP65 T125°C.
Bimetal sensor or posistor sensor can be connected in the spark-proof circuit according to PN-EN 60079-11 of maximum voltage 30V. A limit switch can be connected in the spark-proof circuit according to PN-EN 60079-11.

 

Limit switch parameters:

 

Ui=60V, Ii=3A, Li=0, Ci=0.

The release can be used in ambient temperature range from -20°C to +40 °C and relative humidity of air up to 5%.

The release meets the requirements of directive ATEX (94/9/WE) and possesses test certificate type WE: KDB 04ATEX152X.

 

 

 

 

Note !   valid catalogue    -...2010_pl.pdf  , 
                               or   -...2010_de.pdf


pdf _exze-x_2010_pl.pdf catalogues



 

Cantoni MotorBeselCelma InduktaEmitEma-ElfaFanaFormitNarmodFenes


  • Selected division: Components
    Selected company: Ema-Elfa

    Go to:

  • back    top 
    Privacy policy  |  Site map » Copyright © 2020 Cantoni Group. All rights reserved.
    Designed by MOUTON interactive
    follow us: Visitors: 6142509, today: 302