new account »   log in »
 
 
English polskienglishdeutschрусский
 
 
 
 
 
 
         Products
back
 You are here:  Home Components Ema-elfa Products
» Electromagnetic Brakes
» Powder Brakes and Clutches
» Electrical self-braking motors
» Self-braking motors for quiet operation ( with brakes HPS..AT, 2HPS..BT )
» Electric DC motors ( direct current )
» Electrohydraulic Releases
» Tool boxes
» OZK , PZK discon. and changer-over switches (UL 94 V-0)
» EFM - Control buttons
» ZG , ZW - Sockets and plugs
» Cable Unwinders , Length Meter
» Cold rolled screws and spindles
» Services
»
 

ExZEM - Explosion-proof with holding

 

Application 

 

Electrohydraulic release finds application mainly in brakes for releasing (opening) shoe brakes. The release can be used for all applications requiring to-and-fro movement, e.g. to actuate gates and valves, to open and close flaps and doors, to raise and lower barriers, to move levers and pull-rods as well as to execute operations of to-and-fro movement in various machines and equipment. Operation of the release consists in advance of the piston rod with appropriate force and to specific stroke. With built-in return spring, return of the piston rod also occurs with appropriate force.

 

Release type ExZEM provided with electromagnet having rectifier circuit powered from outside with voltage of 42 V AC. Such design enables holding the piston rod in top position after switching off the hydraulic pump motor by external control and supply circuit. This reduces power drawn by the release.
Release ExZEM can be used both for continuous operation S1 as well as for periodically interrupted operation S3 with relative loading time up to 40% and number of actuations up to 600 c/h.

 

Operating conditions

 

Electrohydraulic release is designed for operation in mining plants in which methane hazard or coal-dust explosion hazard occurs (equipment group I – category M2) as well as in places other than those mentioned above which are endangered with occurrence of explosive atmosphere (equipment group II – category 2 GD) Ex IM2/II 2 GD.
This release is an explosion-proof device with flame-proof enclosure group I and IIB of temperature class 125°C (T4), with signaling circuits of spark-proof version: Exd[ia] I/IIB 125°C (T4).

As a device protected by its enclosure “tD”, the release can be used in the presence of inflammable dust in zone 21 and 22: Ex tD A21 IP65 T125°C.

Bimetal sensor or posistor sensor can be connected in the spark-proof circuit according to PN-EN 60079-11 of maximum voltage 30V.

A limit switch can be connected in the spark-proof circuit according to PN-EN 60079-11.

 

Limit switch parameters:

 

Ui=60V, Ii=3A, Li=0, Ci=0.

The release can be used in ambient temperature range from -20°C to +40 °C and relative humidity of air up to 95%.

The release meets the requirements of directive ATEX (94/9/WE) and possesses test certificate type WE: KDB 04ATEX152X

 

 





 

Cantoni MotorBeselCelma InduktaEmitEma-ElfaFanaFormitNarmodFenes


  • Selected division: Components
    Selected company: Ema-Elfa

    Go to:

  • back    top 
    Privacy policy  |  Site map » Copyright © 2020 Cantoni Group. All rights reserved.
    Designed by MOUTON interactive
    follow us: Visitors: 6143889, today: 223